For aluminum caps
- - - - - - - - - - - - - - - - - - -



Caps are manufactured from aluminium with thickness about 220 microns preliminarily painted on both sides. Caps have lengths varying from  2 cm to 6 cm (wines and spirits)

The painting process takes place on aluminium coil or sheet feed  substrate, after this process the outer side of the caps can be finished by “Side wall” coatings application.

Caps are protected by applying an outer coating for two reasons: after moulding aluminium looks opaque and has a loose grain, moreover it is necessary to print on caps logos or colours  by inks.

 

SHEET FEED APPLICATION OUTER PROTECTION
Series Type Description Performance
REICAP BASECOATS Polyester White,Clear size,Full shade and pastel colors,Gold size Very high flexibility and adhesion Suitable for 30 x 60 caps
REICAP OVERPRINT Polyester Clear,Matt Very high flexibility and adhesion Suitable for 30 x 60 caps. Suitable to be used on Reicap basecoats and size. Wet on dry application

 

SHEET FEED APPLICATION INNER PROTECTION 
Series Type Description Performance

REICAP LACQUER

Epoxy phenolic

Gold lacquer

Very hight resistance,Suitable for 30 x 60 caps

REICAP LACQUER

Polyester

Light gold lacquer

BPA free,Suitable for 30 x 60 caps

 

 

 

 

 

 

SIDE WALL APPLICATION OUTER PROTECTION
Series Type Description Performance
REICAP BASECOAT Polyester White , Clear, matt,full shade,pastel and transparent colors,glitter and pearl effects Very high gloss,good printability with no varnish inks and good scuffing resistance
REICAP OVERVARNISH Polyester Clear, Matt Very high gloss, good scuffing resistance Wet on wet and wet on dry version available

 


Become a fan